Wireless/Radio Flash Trigger for CANON for NIKON for PENTAX

Description

PT-16 GY 16 Channels Wireless/Radio Flash Trigger for CANON for NIKON for PENTAX for SIGMA for OLYMPUS DSLR Camera 

The distant set off for studio flashes and out of doors flash is used because the controller of synchronous set off studio flash of cameras. It consists of a sign sender and a receiver set off and works by the use of the frequency modulation wi-fi distant management.

The sign transmitter adopts the superior circuit and parts, and may transmit the coded FM wi-fi signa. The circuit of the transmitter has the perform of standby and hibernation, thus it has low energy consumption; the merchandise can work underneath the standby mode for a couple of 12 months with just one battery; repeatedly set off for thirty thousand occasions. the set off present is simply 0.01MA, which will certainly trigger no harm to the flash contact of the digicam. The transmitter is relevant to the standard or digital digicam with sizzling shoe or PC controlling interface.

Receiver set off adopts dry battery for energy provide, which is protected, energy-saving, and handy. The product adopts micro-computer for controlling the decoding, Which has superior anti-interference functionality; delicate response pace, the very best synchronous pace can attain 1/250 sec.

All of the fashions of the product uniquely have the multi-frequency isolation approach and the self coding matching perform by customers. Customers can freely match and use the sender and the receiver in accordance with the calls for, which have 16 remoted channels to swimsuit for particular capturing environments. Triggers set in numerous channels could be mixed to work or independently work however don’t intrude with one another in an environment friendly distance.

Method Parameter:

The way to use:

1. Make certain the channel selector of each transmitter and receiver at identical place
2. Insert your flash sizzling shoe socket into the receiver’s sizzling shoe jack
3. Press the check button in your transmitter. The Flash ought to now flash
4. Insert the transmitter’s sizzling shoe socket into your digicam’s sizzling shoe jack
5. (in case your digicam doesn’t have a sizzling shoe use a PC sync wire and insert into the socket)
6. You need to now be prepared to start out capturing

Observe:

PT-16/PT-16GY use the entire new system,So it cannot work with some other flash set off.

Should you use Nikon i-ttl system flash on this set off,please affirm the flash is working in “M” mode,the receiver cannot work with i-ttl flash in “ttl” mode,any i-ttl flash with out handbook mode is not going to work correctly.

Appropriate For: 

Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;
Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
Olympus FL-50, FL36;
Sigma EF-500 DG Tremendous, EF-500 DG ST, EF-430;
Sunpak Auto 2000DZ, 622 Professional, 433AF, 433D, 383, 355AFm 344D, 333D;
Vivitar 285HV (Older Vivitar 285/283 works solely with PC sync);
Different flash fashions with a set off voltage of 12V or decrease;
Work with flash models utilizing common sizzling shoe like Nikon, Sigma, Olympus, Pentax (besides Minolta SONY as they use a particular sizzling shoe)

Bundle Included:

1. 16 Channels Transmitter x1(12V 23A battery not included)
2. PT-16GY  Receiver x1 ( AAA batteries don’t present )
3. PC Sync wire for digicam (2.5mm to PC) x1